49
(1) Alerts: Add, edit or remove alert destinations.
(2) Mouse mode: Change mouse mode.
Set Mode to Absolute: the absolute mode mouse can switch freely between remote
picture and local picture.
Set Mode to Relative: the relative mode mouse can switch between remote picture
and local picture by selecting <Alt>+<M>.
(3) Network: see the MAC address or change network settings, including dynamic
and static IP assignment.
(4) SMTP: Con
fi
gure the SMTP email server.
(5) Users: Add, edit and remove users.
The username should start with English letters and have a character size within
4~32 and a password of at least 8 character size.
User rights can be divided into three kinds: Administrator, Operator and NO
Access.
Administrator: can conduct all operations.
Operator: only can perform general application operations and can’t change
con
fi
guration and update Firmware.
NO Access: not allowed to log in remote management interface.
(6) BMC Sensor: Setup BMC SensorAdress or change mode.
(7) Date Time/NTP Settings: con
fi
gure the Date, time and NTP Server.
7.3.4 Remote Control Menu
7.3.4 Remote Control Menu
This section allows you to perform various remote operations on the server,
including operation remote console, system switch and other control operations.
Notice: if the machine you purchased can’t support KVM, then the Console
Notice: if the machine you purchased can’t support KVM, then the Console
Chapter Seven Instructions of baseboard management controller
Chapter Seven Instructions of baseboard management controller
