15
(Note: the item Channel Number in Set LAN Con
fi
guration can only be manually
set to channel 01 or channel 08. Default setting is channel 01; if you need to use the
network card 1 as the management interface, you need to set it to channel 08.)
●
Onboard Devices Con
fi
guration
This menu can be used to set the integrated motherboard devices (such as network
card).
III. Boot menu
III. Boot menu
Boot menu is mainly used for system setup and priority settings of system boot
devices.
●
Boot Settings Con
fi
guration
This menu can be used to set the system startup process.
* Quick Boot
This item is to set the enable-quick-start system. If the system is set to Enabled,
then it allows BIOS to reduce the boot time by skipping some tests.
* Quiet Boot
This item can be used to set display status during the system startup process. Set
to Disabled, it will show the self-test process and test information; set to Enabled (de-
fault), it will display the LOGO of manufacturers.
●
Boot Device Priority
Enter this menu and select certain boot order device item. Press <Enter> button
and the system will display optional boot device table. Then select a device through ar-
row key in the table to
fi
nish the setting of the boot order item.
(Note: If you want to set U-disk or other external storage devices as the
fi
rst in
boot order, please
fi
rst enter the ‘Hard Disk Drives’ item and set U-disk or other exter-
nal storage devices as the
fi
rst in boot order, then enter the ‘Boot Device Priority’ to
start the settings.)
IV. Security menu
IV. Security menu
●
Supervisor Password
●
User Password
The above two items, which can not be set, display the setting state (whether it
has been set or not) of the passwords of the super-user and the common user respec-
tively in the current system.
●
Change Supervisor Password
Chapter Three System Setup
Chapter Three System Setup
