67
BIOS Setup
Save & Exit Menu Menu Interface Instruction Table
Interface Parameters
Function Description
Save Changes and Exit
To Save and exit
Discard Changes and Exit
To abandon changes and exit.
Save Changes and Reset
To save changes and reboot
Discard Changes and Reset To abandon changes and reboot
Save Changes
To save changes.
Discard Changes
To abandon changes.
Restore Defaults
To restore factory settings.
Save as user Defaults
To save as defaults.
Restore user Defaults
To restore user defaults.
Boot Override
To reload boot device, you could select all boot devices in the following.
8.3Firmware Update
For BIOS update, you could select to update in DOS or OS.
1)
Use afudos tool to update BIOS in DOS
System boots from USB DOS startup disk, enters the directory containing afudos
tool, while bin files of the corresponding new BIOS version have been put into this
folder, execute command: afudos BIOS.bin /b /p /n /x /me to update BIOS and ME,
for BIOS.bin – bin files of the new BIOS version, an example is as shown in the
following figure:
When there’s no change in ME part, to update BIOS part, it is only required to
execute command: afudos BIOS.bin /b /p /n /x.
Parameter instructions: /b -- Program Boot Block
Summary of Contents for SA5212M4
Page 68: ...63 BIOS Setup 1 System Temperature Information 2 System Fan Speed ...
Page 75: ...70 ...
Page 86: ...81 BMC Settings ...
