Inspur SA5212M4, Manual

Page: 6 / 107

1
Safety Introduction
1 Safety Instructions
Warning: Please be advised to follow the instructions below for safety. Failure to do
so could result to potential dangers that may cause property loss, personal injury or
death.
1. The power supplies in the system may produce high voltages and energy
hazards that may cause personal injury. For your safety, please do not attempt
to remove the cover of the system to remove or replace any component without
assistance provided by Inspur. Only service technicians trained by Inspur are
authorized to remove the cover of the host, and to remove and replace internal
components.
2. Please connect the equipment to the appropriate power supply. Use only power
supplies with the correct voltage and electrical specifications according to the
label. To protect your equipment from damages caused by a momentary spike
or plunge of the voltage, please use relevant voltage stabilizing equipment, or
uninterruptible power supplies.
3. If you must use an extension cable, please use a three-core cable with properly
grounded plugs. Observe extension cable ratings. Ensure that the total rating of
all equipment plugged into the extension cable does not exceed 80 percent of
the ratings limit for the extension cable.
4. Please be sure to use the power supply components that come with the server,
such as power lines, power socket (if provided with the server) etc. For your
safety, please do not replace power cables or plugs randomly.
5. To prevent electric shock dangers caused by leakage in the system, please
make sure that the power cables of the system and peripheral equipment are
correctly connected to the earthed/grounded power socket. Please connect
the three-core power line plug to the three-core AC power socket that is well
earthed and easy to access. Be sure to use earthing /grounding pin of power
lines and do not use the patch plug or the earthing/grounding pin unplugged
with cables. In the case that the earthing/grounding conductors are not installed
and it is uncertain whether there are appropriate earthing/grounding protections,