27
Hardware Options Installation
●
Memory installation principle:
Only memory of the same type could be used in the same machine. Detailed
memory installation and combination principles are as follows:
a.
The white slot shall take the priority, while CPU1 memory shall be symmetrically
installed
with
CPU0.
b.
For single CPU, memory shall follow the screen printing sequence: CHA-0, CHB-
0, CHC-0, CHD-0, CHA-1…
c.
For dual CPUs, CPU0 position memory shall follow the screen printing sequence:
CHA-0, CHB-0, CHC-0, CHD-0, CHA-1… CHG-0, CHH-0, CHE-0, CHF-0 …
Step 1: Open fixing catches on both ends of memory slot.
Step 2: Align the notch at memory bottom with memory slot positioning point, and
press both ends of the memory with your thumbs, to insert the memory into the slot
completely, and then fasten fixing catches on both ends of the memory slot.
6.3 Hot-plug Hard Drive Option
When adding hard drives to the server, observe the following general guidelines:
●
The system automatically sets all device numbers.
●
If only one hard drive is used, install it in the bay with the lowest device number;
please check the hard drive device number on the pull-tag.
Installing a hot-plug SAS hard drive
1.
Remove the SAS hard drive blank.
Summary of Contents for SA5212M4
Page 68: ...63 BIOS Setup 1 System Temperature Information 2 System Fan Speed ...
Page 75: ...70 ...
Page 86: ...81 BMC Settings ...