NX5760M3 Computer Blade Server
5
components, you should grab the edges of the plug-in cards or components or their
metal fixed supports.
8. During the process of cabinet installation and application, please pay attention to the
following matters:
—
After the installation of cabinet is finished, please ensure that the supporting feet have
been fixed to the rack and supported to the ground, and all weight of the rack have been
fell onto the ground.
—
It shall install into the cabinet according to the sequences from the bottom to the top, and
first install the heaviest component.
—
When pulling out the components from the cabinet, it shall apply force slightly to ensure
the cabinet to keep balance and stabilization.
—
When pressing down the release latch of the sliding rail of components and sliding in or
out, please be careful, as the sliding rail may hurt your figures.
—
Never make the AC power branch circuit in the cabinet overload. The sum of cabinet load
shall not exceed 80% of the ratings of branch circuits.
—
Ensure that components in the cabinet have good ventilation.
—
When repairing components in the cabinet, never step on any other components.
Warning: the following warnings show that there are potential dangers that may cause
property loss, personal injury or death:
Warning 1: The power supply equipment in the system may generate high voltage and
dangerous electrical energy and thus cause personal injury. Please do not dismount the cover of the
host or to dismount and replace any component in the system by yourself, unless otherwise
informed by Inspur; only maintenance technicians trained by Inspur have the right to disassemble
the cover of the host, dismount and replace the internal components.
Warning 2: Please connect the equipment to appropriate power supply, and the power should
be supplied by external power supply which is indicated on the rated input label. To prevent your
equipment from damages caused by momentary spike or plunge of the voltage, please use relevant
voltage stabilizing equipment or uninterruptible power supply equipment.
Warning 3: If extended cables are needed, please use the three-core cables matched with
correct earthed plug, and check the ratings of the extended cables to make sure that the sum of rated
current of all products inserted into the extended cables do not exceed 80% of the limits of the rated
currents of the extended cables.
Warning 4: Please be sure to use the supplied power supply component, such as power lines,
power socket (if supplied with the equipment) etc. For the safety of equipment and the user, do not
replace randomly power cables or plugs.
Warning 5: To prevent electric shock dangers caused by leakage in the system, please make
sure that the power cables of the system and peripheral equipment are correctly connected to the