NX
5760M3
Computer Blade Server
4
equipment, please pay attention to the following matters:
—
In case of thunder and lightning weather, please do not connect or use the
modulator-demodulator. Otherwise, it may be subject to lightning strike.
—
Never connect or use modulator-demodulator in moist environment.
—
Never insert the modulator-demodulator or telephone cables to the socket of network
interface controller (NIC).
—
Before unpacking the product package, contacting or installing internal components or
contacting un-insulated cables or jacks of the modulator-demodulator, please
disconnect the modulator-demodulator cables.
6. In order to prevent the electrostatic discharge from damaging the electronic components in
the equipment, please pay attention to the following matters:
—
You shall conduct off the static electricity on the body before dismounting or contacting
any electronic component in the equipment. You can conduct off the static electricity
on the body by contacting the metal earthing objects (such as the unpainted metal
surface on the chassis) to prevent the static electricity on the body from conducting
itself to the sensitive components.
—
For electrostatic sensitive components not ready to be installed for application, please do
not take them out from the antistatic package materials.
—
During the work, please touch the earthing conductor or the unpainted metal surface on
the cabinet regularly to conduct off the static electricity on the body that may damage
the internal components.
7. When dismounting the internal components with the approval of Inspur, please pay
attention to the following matters:
—
Switch off the system power supply and disconnect the cables, including disconnecting
any connection of the system. When disconnecting the cables, please grab the
connector of cables and plug it out, and never pull the cables.
—
Before dismounting the cover of cabinet or touching the internal components, the
products need to be cooled down.
—
Before dismounting and touching any electronic component in the equipment, you shall
conduct off the static electricity on the body by touching the metal earthing
objectives.
—
During the dismounting process, the operation shall not be too big, so as to prevent
damage to the components or scratching of the arms.
—
Carefully deal with the components and plug-in cards, and please never touch, the
components or connection points on the plug-in cards. When taking the plug-in cards or
