NX5760M3 Computer Blade Server
35
bus:dev.fn=02:00.0 addr.reg=88 data.reg=92
Chip revision is: 01
/dev/mst/mt4099_pci_cr0
- PCI direct access.
bus:dev.fn=02:00.0 bar=0xdfb00000 size=0x100000
Chip revision is: 01
If the above information is displayed, it indicates HCA device is recognized normally and
could be used
4.
Driver program uninstall
Execute /mnt/uninstall. Sh, system prompts “Do you want to continue? [y/n]”, input “y” to
finish driver program uninstall automatically.
Chapter Four Integrated RAID System
This chapter mainly introduces configuration of mainboard integrated SATA controller RAID
and its usage.
To use a mainboard integrated SATA RAID, it is required to enter BIOS, set
Chipset→PCH→SCU devices option to [Enabled], and then set Onboard SATA Oprom option
to [Enabled].
4.1
How to Enter SATA RAID Configuration Interface
1.
During system startup, the following content will display on the screen:
Press<CTRL-I> to enter Configuration Utility…
2.
Press [Ctrl][I] to enter SATA RAID configuration interface.
4.2
Application of Control Keys
Press Key
Description
↑↓
Used to move cursor in different menus or to change values
of menu options.
TAB
To select the next menu setting option.
Enter
To select menu.
Esc
To exit menu or return to previous menu from sub-menu.
