NX5760M3 Computer Blade Server
9
1.3 NX5760M3 Computer Blade Unit Interface and Indicator Introduction
Figure 1-2 Blade Unit Interface and Indicator
Number
Name
Status/Function
1
Blade
unit
power
indicator
Green light indicates ON, yellow indicates
OFF
2
Blade unit KVM status
indicator
Blue indicates KVM of this blade is activated,
blue flashing indicates UID is on
3
Network indicator
Green flashing indicates direct connection to
internet
4
Blade unit system fault
indicator
Red indicates blade unit system fault
5
Blade unit power switch
To open blade unit power
6
KVM
connection
interface
To connect KVM wire, could connect CD
drivers, floppy drivers and monitors etc.
7
KVM switch
To open KVM function
1.4 Usage of NX5760M3 Computer Blade
NX5760M3 computer blade shall use with Inspur I500 server, and computer blade could
only be used when installed in I5000 server system, about how to install NX5760M3 blade
onto an I5000 server, please refer to related parts in I5000 server use manual or illustration on
chassis of I5000 blade server host, which is not repeated here.
1.5
Open upper panel of the chassis
Methods to open upper cover of the chassis are as follows:
1. Shut down the system, pull out blade module, and press unlock spring;
2. Push outwards according to directions shown by arrows, remove upper cover of the
chassis.
