56
Key Instruction Table
Key
Description
↑↓
Used to move cursor in different menus or to change values of menu options.
TAB
To select the next menu option.
Enter
To select a menu.
Esc
To exit menu or return to previous menu from submenu.
Menu Instruction Table
Create RAID Volume
To create an RAID volume.
Delete RAID Volume
To delete an existed RAID volume.
Reset Disks to Non-RAID To reset HDDs in RAID volume, and to restore them to non-RAID status.
Mask Disk as Spare
To mask the HDDs as spare disks. The data will be cleared, and these HDDs can
not be selected during RAID setting. It can be restored through the Reset Disks
to Non-RAID menu.
Exit
To exit SATA Host RAID configuration interface.
2.2 Create RAID Volume menu. After entering SATA RAID configuration interface, you could
use up and down arrow keys to select this menu, and then press Enter to enter the Create
RAID Volume menu, or directly input the number before the menu to enter the Create RAID
Volume menu. For other menu operations that are similar, it will not be repeated here.
A Create RAID Volume instance is shown in the following figure:
Summary of Contents for NF8480M5
