BMC Settings
119
Table 34 Fixed Protocols
Service
Usage
State
Port
SNMP
SNMP Get/Set
Enable
161
syslog
syslog
Enable
514
Websockify
KVM on HTML5
Enable
9666
Websockify
Virtual Media on HTML5
Enable
9999
srvloc
Sever location
Enable
427
smux
Enable
199
9.17 Time and NTP
BMC supports that system describes instants in time. It’s defined as the number of seconds
that have elapsed since 00:00:00 1970/01/01 and the time can be referenced as timestamp
for other BMC application.
By interface such as WEB UI, users are able to get current system date and time information,
or configure date and time, or synchronize date and time through NTP.
Table 35 Time and NTP
Mode
State
UTC Timezone
NTP Server1
NTP server2
NTP Server3
Manual
Disable
N/A
N/A
N/A
N/A
NTP
Enable
GMT+/-0
pool.ntp.org
time.nist.gov
time.nist.gov
Time Synchronization
●
BMC will synchronize time with ME after BMC running.
●
BIOS will synchronize time to BMC when beginning of BIOS POST.
●
If NTP is enabled and NTP servers are accessible, BMC will synchronize time with NTP
servers per hour.
Page “BMC Settings->NTP” in Web GUI displays the current BMC time and NTP settings.
Figure 38 NTP
Summary of Contents for NF8480M5
