1
Safety Introduction
1 Safety Introduction
Warning:
the following warnings show that there are potential dangers that may
cause property loss, personal injury or death:
1.
The power supply equipment in the system may generate high voltage and
dangerous electrical energy and thus cause personal injury. Please do not
dismount the cover of the host or to dismount and replace any component in
the system by yourself, unless otherwise informed by Inspur; only maintenance
technicians trained by Inspur have the right to disassemble the cover of the
host, dismount and replace the internal components.
2.
Please connect the equipment to appropriate power supply, and the power
should be supplied by external power supply which is indicated on the rated
input label. To prevent your equipment from damages caused by momentary
spike or plunge of the voltage, please use relevant voltage stabilizing equipment
or uninterruptible power supply equipment.
3.
If extended cables are needed, please use the three-core cables matched with
correct earthed plug, and check the ratings of the extended cables to make sure
that the sum of rated current of all products inserted into the extended cables do
not exceed 80% of the limits of the rated currents of the extended cables.
4.
Please be sure to use the supplied power supply component, such as power
lines, power socket (if supplied with the equipment) etc. For the safety of
equipment and the user, do not replace randomly power cables or plugs.
5.
To prevent electric shock dangers caused by leakage in the system, please
make sure that the power cables of the system and peripheral equipment are
correctly connected to the earthed power socket. Please connect the three-
core power line plug to the three-core AC power socket that is well earthed and
easy to access, be sure to use the earthing pin of power lines and do not use
the patch plug or the earthing pin unplugged with cables. In case of the earthing
conductors not installed and it is uncertain whether there are appropriate
earthing protections, please do not operate or use the equipment. Contact and
consult with the electrician.