24
the inverter.
inverter.
voltage is 110/220V.
E37
Inverter emergency shut
down.
Replace the inverter, the
control cables or the main
board of the console.
E41
Overheating warning for
the inverter.
Apply lubrication oil, clean off
the dust or replace the
inverter.
E77
Inverter
communication
error
Replace the inverter, control
cables or the main board of
the console.
E78
Console membrane key
error
Replace the membrane key,
the key transport board or
the main board of the
console.
SWITCHING BETWEEN METRIC AND IMPERIAL UNITS
1) The standby mode
2) Press STOP + ENTER for approx. 10 seconds to
enter the factory settings.
3) Press ENTER and hold for 2 seconds to enter the
unit selection page.
4) Use SPEED+ and SPEED- to switch METRIC or
IMPERIAL units.