12
STEP 5
– Main frame and the console set
•
Attach the console set (B) to the accessory tray set (E) and connect the control cables on the
accessory tray (E) to the console cables. While connecting the cables, you will need one
person to hold the console set so
that it doesn’t fall down.
•
Use screws (K10) and washers (K11 and K12) to secure the console set to the accessory tray
set (E).
•
Use screws (K13) to attach the console back cover (C) to the console.
•
Use screws (K14) to attach the accessory tray back cover (D) to the accessory tray. Make
sure you d
on’t damage or clip the cables while doing it.
•
After the above is finished, use screws (K20) and attach the underside cover of the accessory
tray (N) to the accessory tray set as shown in the picture.
NOTES:
•
After each successful cable wire connection, you should hear a click.
•
For better safety during the assembly, request the help of at least one other person.
X01
Upper connection bus cable
X02
Upper control cable