86
“
C
ONSOLE
I
NSTRUCTIONS –
I
NTERVAL (P4)
”
“
2
” Instruction
Note for During Exercise:
If you haven’t adjusted the proper cushion level:
“
AUTO
” button: Place two feet on the running deck’s Detective Area.
Through each individual user’s weight, press the “
AUTO
” button, the
console would auto-adjust the proper cushion level (from hard to soft), the
auto-adjustment time takes about 15 seconds to complete.
For different user needs, the cushion level is also allowed to manually
adjust by pressing “HARD▲“ or “SOFT▼” button.
NOTE: It’s
recommended to gradually adjust cushion level one at a time in
order to give yourself a proper workout feelings.
During workout, press ENTER button to review SPEED, INCLINE, SCAN,
400METER/0.25MILE profile in the Main LED window:
“
ENTER
” button: During the workout, press the
ENTER
” button to review
your workout’s
SPEED
,
INCLIINE
,
SCAN
,
400METER/0.25MILE
profile.
If you haven’t adjusted the fan settings:
This treadmill has 3-level fan settings (from breeze to strong wind)
Through different user needs, press this button to adjust the proper wind
strength for the workout.
Speaker Sound System:
To enjoy your workout with music, simply connect
any MP3/CD player to the
LINE IN
jack on the
console.
Press “
VOL (▲)or (▼)
” button to adjust the
proper sound level.
No Pulse signal:
You must wear a compatible heart rate chest strap or place both of your
hands on the
Pulse Sensors
on the
Handlebar
. Your pulse will be
displayed approximately few seconds.
If you do not ware a compatible heart rate chest strap or place your hands
correctly and a few seconds pass without a pulse input, the console will
turn off the pulse circuit. The console will then display an error message
“P”. Place your hands back on the
Pulse Sensors
correctly, the pulse
readout will appear again.
Summary of Contents for IN 2440
