![background image](http://html1.mh-extra.com/html/insportline/in-2440/in-2440_owners-manual_2069334066.webp)
66
“
O
PERATION
I
NSTRUCTIONS
”
L
UBRICATION INSTRUCTIONS – EVERY 150 HOURS or 2000 KM / 1,250 MILES
k. It is necessary
to lubricate your running deck every 150 hours or
2000KM/ 1,250MILES to maintain optimal performance.
l.
Once the treadmill workout time reaches to 150 hours or 2000KM/
1,250MILES, the console will display the scrolling message
“
LUBRICATE DECK HOLD TO CLEAR
”.
NOTE: The
treadmill will not operate while the message is showing. To
suspend/clear the message, hold the “MODE” key for 5
seconds.
m. Start performing the lubrication procedure.
n. Insert the
spray nozzle (B)
into the
spray head of the lubricant
can (A)
.
o. While lifting the side of the
running belt (12)
, gently position the
spray nozzle between the running belt and the running deck from
the front of the treadmill.
p. Spray the lubricant to the running deck, moving from the front of the
treadmill to the rear.
q. Repeat the above procedure on the other side of the belt.
r. Then runs the treadmill without anyone on
it at 10~12 kph (6~7 mph) for at least 2~3
minutes to let the lubricant spread evenly
across the running deck and underside of
the running belt.
s. Check the running belt whether is
off-center or slips, if it does, go to page
9~10
to center the belt or adjust the belt
tightness until the running belt has been
tightened properly.
t.
Plug in the power cord and insert the safety
key to start using the treadmill.
Summary of Contents for IN 2440
