62
“
O
PERATION
I
NSTRUCTIONS
”
R
UNNING BELT ADJUSTMENT
Your treadmill’s running belt has been properly adjusted at the factory. However, during shipping and handling or by use on
an uneven surface, the belt may move off center and require a few simple adjustments.
CENTERING THE BELT: If the running belt is
off center to the LEFT:
5. If the belt is slightly off-center, first runs the treadmill without
anyone on it at 6~8 kph (4~5 mph) for at least 5~10 minutes to
see whether the treadmill could automatically center the running
belt. If not, move to step 2. to start centering the belt.
6. Stand behind the treadmill, with the treadmill running at 6kph
(4mph) observe the running belt. If the belt tracks off center to
the
left
, please take a look at the following process to center the
belt.
CAUTION: Be very careful to keep your fingers and any
object clear of the belt and rollers
7. Use the Allen Wrench –
a. To turn the
left
rear roller adjustment bolt 1/4 turn in
clockwise
direction, which moves the running belt to the
right.
b. Or turn the
right
rear roller adjustment bolt 1/4 turn in
counterclockwise
direction, which moves the running belt
to the right.
Caution: Do not turn the adjustment bolt more than 1/4
turn at a time. Overtightening the belt can damage the
treadmill.
8. Repeat the above procedure until the walking belt is centered. It
may be necessary to test walking belt tension once you have
completed the above procedure if the belt feels like it’s slipping
while walking. Refer to below to the “
Walking Belt Slipping
”
instructions on Page
10
.
Adjustment Bolt Location
Summary of Contents for IN 2440
