9
STEP 3
1.
Attach the 2x pulley brackets (13) to the main frame (1) using 2x 1/2 ”x4-1 / 4” bolts (31), 4x
1/2 ” washers (41) and 2x 1/2” nylon nuts ( 45).
2. Attach the 2x front covers (5) to the main frame (1) with 8x M6x12 mm bolts (39).
3. Tighten all screws.
4. WARNING: When attaching the covers (5), pay attention to the holes. The cover is fixed with a
bolt in the hole without a thread, see. Fig. 1.
