![background image](http://html1.mh-extra.com/html/insportline/23283/23283_user-manual_2069058013.webp)
13
ANCHORING TO THE RIGHT SIDE STEPS 7
– 14
STEP 7
1. Remove the top frame (2) from the main frame (1) by removing the 2x 3/8
”x2“ hex bolts (33),
4x 3/8
” washers (42) and 2x 3/8” nylon nuts (46).
2. Remove the 2x 3/8
”x1-3 / 4” hex bolts (34) and 2x 3/8” nylon nuts (46) from the main frame
(1).
3. Remove the pulleys (19) from the pulley holder (8) by removing the 3/8
”x1-3 / 4” hex bolts (34)
and 3/8
” nylon nuts (46) and loosen the 2x 5/16” x1 / 4” bolts (40) see Fig. 1. Remove the
guide bar holder (8) from the main frame (1) and the 2x guide bars (4) from the holder (8) by
removing the 2x 5/16
”x5 / 8” Allen bolts (35). Fig. 2.
4. Rotate the guide bar holder (8). Attach the holder (8) to the main frame (1) and guide rods (4)
using 2x 5/16
” x5 / 8” Allen bolts (35), see Fig. 3, leave 2x 5/16"x1 / 4" (40) bolts loosened.
Reattach the 90mm pulleys (18) to the guide bar holder (8), using the 3/8
”x1-3 / 4” hex bolts
(34) and 3/8
” nylon nuts (46) see. Fig. 4 with a guided cable (26). If the cable (26) is
misaligned, refer to step 15, Figures 1 and 2 for cable guidance.