![background image](http://html1.mh-extra.com/html/insportline/23283/23283_user-manual_2069058021.webp)
21
CABLE GUIDENCE
STEP 15
– CABLE GUIDENCE
1. Remove the top or bottom pulley (18) from each p
ulley holder (13) by removing the 2x 3/8 ”x1-
3 / 4” hex bolts (34) and 2x 3/8 ”nylon nuts (46).
2. Thread the ball cable end (26) through the pulleys (18) on the right pulley holder (13) and then
reattach the pulley (18) to the pulley holder (13) using the 3/
8 ”x1-3 / 4” hex bolts (34) and 3/8
”nylon nuts (46) see. Fig. 4.
3.
Remove the 3/8 ”x3” hex bolt (32) and 3/8 ”nylon nut (46) from the double pulley (9) see. Fig.
3.
4. Pass the cable (26) over the pulley A4 in the double pulley holder (9), see. Fig. 1 to pulley A5
on the main frame (1) and then down to pulley A6, see fig. Fig. 2.
5.
Reattach the 3/8 ”x3” hex bolt (32) and 3/8 ”nylon nut (46) to the double pulley bracket (9).
6. Pass the cable (26) through the two pulleys (18) in the left pulley holder (13) and then reattach
the lower pulley (18) to the left pulley holder (13) using a 3/8 ”x1-3 / 4” hex screw (34) and 3/8
”nylon nuts (46) see. Fig. 4.
7. NOTE: The length of the cable can be adjusted by removing the top of the weight (10) and
turning the weight selection bar (11). More in step 16.