22
STEP 16
– CABLE TENSION
1. Use the weight selection pin (27) to stabilize the weight selection bar (11) and loosen the top
weight bolt (29), see. Fig. 1.
2. Remove the top part of the weights (10). Hold the pulley (9) and turn the weight selection bar
(11). If the cable is too long, turn the rod (11) clockwise. If the cable is too short, turn the rod
(11) counterclockwise, see. Fig. 2.
3. Use the pin (27) to find the most suitable tension and then tighten the bolt (29), see. Fig. 3.
4. After findin
g the most suitable cable tension, fasten the pulley (9) using a 1/2 “nut (47), see.
Fig. 4.
