![background image](http://html1.mh-extra.com/html/insportline/23283/23283_user-manual_2069058019.webp)
19
STEP 13
1. Mounting of weights depends on the configuration of weights:
•
14x weights (12), you must place spacers (15) on the guide rods (4), see Fig. 1. 14x weights
and top part of weights (10) = 68 kg
•
19x weights (12), do NOT place spacers (15) on guide rods (4), see Fig. 2. 19x weight and top
part of weight (10) = 90 kg
2. Remove the pre-installed guide bar holder (8) and, depending on the weight configuration,
place the weight for:
•
14x weights: put on spacers (15) and rubber washers (16) then put on weights and proceed as
shown. Fig. 1.
•
19x weights: place only the rubber washers (16) and then put the weights and proceed as
shown. Fig. 2.
3. Attach the top part of the weight (10) to the weight selection rod (11) using the bolt (29) and
tighten. Screw the double pulley (9) into the rod (11) by 10 full turns. Slide the top part of the
weight (10) together with the rod (11) into the guide rods (4), see. picture.
4. Place the guide bar holder (8) on the guide bars (4) and then attach the holder (8) to the main
frame (1) with 2x 5/16
”x5 / 8” Allen bolts (35) and attach the guide bars (4) to the holder (8)
with 2x 5/
16 ”x1 / 4” bolts (40).
5. Tighten all bolts.