44
32"/55" 1080p, 60Hz, LED Insignia Roku TV
www.insigniaproducts.com
7
When the channel scans finish, your Insignia Roku TV shows the number of channels it added.
Scanning for channels can take several minutes.
Now, you’re ready to watch broadcast TV! While you're watching, try the following:
• Press
UP
or
DOWN
to change channels.
• Press
RIGHT
to display the channel list and then use
UP
or
DOWN
to select a channel to watch. Or press
REWIND
or
FAST FORWARD
to jump through the channel list a page at a time.
• Press
OK
to display information about the current program.
• Press
to switch to the previously tuned channel.
• Press to see options for picture and sound settings.
Tip
Repeat the channel scan from time to time to make sure you are receiving all of the
latest channels. Broadcasters add and remove channels, move channels to different
parts of the spectrum, and change the power levels of their channels periodically.
Note
You’ll have to repeat the channel scan if you remove the
Antenna TV
tile from the
Home
screen or perform a factory reset. To repeat the channel scan at any time, go to
Settings >TV inputs >Antenna TV > Scan again for channels
. Your antenna
reception and picture quality depend on the position of your antenna and on your
location relative to the antennas of broadcasters in your area.
Note
If
is not available on your remote control, you can use
on the Roku mobile app
or the Jump Back button on a universal remote. For more information, see
on page
Insignia Roku TV remote control
on page
has more information on using the
remote control buttons while watching TV.
