Electric Connecons.
At this stage you will need to connect the following. These are all
12V and considered “safe” for DIY connecon as each is labelled
and low voltage.
NEVER CONNECT TO MAINS AT THIS STAGE
Overhead light * Led rear panel lights * TV * Ozone (if fi8ed) *
Speaker * fan * Aerial (unfold if fi8ed) * Telephone connecon *
C.D external jacks if required
We have not pictured these because all connecons are
marked
to
pair together. Idenfy these connecons and snap together with
connector blocks on the end of each.
The back of the control panel is pictured below
Please note the three items shown with connecons fit as so:
D PIN PLUG TO D PIN PLUG. Make sure this is pushed home 100%
For the latest fing instrucons please visit
www.insigniarange.co.uk
Middle connecon in picture is the temperature sensor which
pushes into hole found in centre column below just above tele-
phone mike. (top chrome cover)
You have one more wire protruding from the control console this is
the white wires x3. Do not fit this as for U.S market only.
For the latest fing instrucons please visit
www.insigniarange.co.uk
27 28
