background image

 

For the latest fing instrucons please visit 

www.insigniarange.co.uk

 

For the latest fing instrucons please visit 

www.insigniarange.co.uk

 

39                                                                                                                                                                                                                                                                                        40 

Message to tradesmen: 

Should you require any help or advice 

please call 0844 800 3069 10.00am –4.00pm. We further point out 
that providing this product has been built correctly and the instruc-

ons followed with parcular a8enon to the final paragraph, the 
client should have been le? with a 100% trouble free product. We 

have on occasion heard of less scrupulous tradesmen making re-
turn visits at the customers request because of various faults and 

charging effecvely for correcons to work that should never have 

been required. We would expect no further charges should be 
made for call backs unless alien to original work carried out. 
 

Safety precauons 

 

 

Never leave children una8ended in the shower or bath.

 

Never bath children (under 12) using whirlpool funcon if fi8ed.

 

Regulate the temperature of water before showering 

Never allow children to use steam funcon una8ended. This func-
on is also not recommended for children. ADULTS ONLY.

 

If steam facility is used always be aware that with many types, the 

steam outlet in tub or fi8ed on column MUST be in “OPEN” posi-
on. Close a?er use. Failure to do so will result in crazing of acrylic 

due to excessive heat generated on it.   

Always be aware of the steam outlet pod posion. Never use in 

close proximity to the person using it. 
Never use this shower if you have been drinking alcohol. 
Never use with more than one person unless the shower is de-
signed for this. 
This product is not to be used for washing / bathing animals 

Always turn power supply off a?er use

 

Do not use a remote control inside the shower or leave in heavy 
moisture areas. 

Never clean your shower directly a?er use especially a?er steam-

ing. Allow one hour or longer to cool to room temperature. Cold 

water on hot glass increases the risk of glass sha8ering and in-

creases the risk of acrylic crazing. Never do this! 

Never be tempted to invesgate a fault by opening ANY electrical 
fiCng on your appliance. No parts are reclaimable and no parts are 

supplied for these. All items are unit exchange only from both the 
manufacturers and ourselves.   

Warranty informaon.  

 

 
This product is covered against any electrical or mechanical break-
down for a minimum period of 12 months. This warranty is limited 
to replacement parts only as it is deemed to be a DIY product and 
delivered to the customer ready for assembly. No service costs are 

paid. In addion to items menoned the warranty also includes 

any further item deemed to have suffered a defect by manufactur-
ers or makers fault. This to include tubs, walls, roof, columns, origi-
nal makers hoses, valves, computer control, transformer boxes, 
whirlpool pumps, chassis.  

PLEASE NOTE

 

a further addional peri-

od of 12 months is available as an upgrade provided it is taken 
within 28 days from the day this product was delivered to you. For 
cost and enabling kindly contact Insignia on 0844 800 3069.   
 
Your warranty starts from the day the product was delivered not 

the day it was originally ordered. To inialise your warranty please 
fill in your warranty registraon card within 90 days of delivery and 

return  to address shown or simply go on line to: 

Summary of Contents for 8058





























Reviews: