For the latest fing instrucons please visit
www.insigniarange.co.uk
If you fi8ed the accessories as above your shower should now look
like picture below.
Please note
this model comes in both le? and
right hand we have used examples of both which has no effect on
the instrucons but aids the owner of either to recognise parts
For the latest fing instrucons please visit
www.insigniarange.co.uk
Chrome rack. Need help with this? Follow link
hp://www.insigniarange.co.uk/instrucons/Assembling%
20the%20glass%20rack.pdf
19 20
Having got to this stage the
roof is next for fiCng. Lay roof
in posion inside channels at
the top. When this is square
pre-
drill holes in roof secon
at the rear only. 7 x screws
required.
Now and very importantly
align the shower glass to the
shower tub. Straight lines
along headrest end and the
back panels. When 100% cor-
rect drill 7 x holes through the
frames as menoned above
direct into tub.
DO NOT SCREW. When this secon is complete,
DISEMBLE ALL
PANELS BACK TO START POSITION
(not front angled secon) Now
carefully silicone seal
ALL
Aluminium joints and mang surfaces
covering the surface 100% making sure and very importantly,
sealing the shower side of screws!. Make certain the glass frames
sit flush on a bed of silicone onto the tub. Carry out same proce-
dure under the bo8om of curved frame where it meets the tub.
Rebuild to the point it was now screw the shower frame rear and
back to the tub through holes made earlier