Version 1.01
12
Administration
Move through the tree by clicking on an icon to expand or collapse the tree.
The nodes on the tree represent web pages that allow viewing and
modifying the parameters.
2.4.4 Set Operating Mode, IP Address, Subnet Mask,
Default Route IP, DNS Server IP of AirEther CB11
Operation Mode
When setting up AirEther CB11, you have to decide which Operation Mode
in which AirEther CB11 will function. This option is available in the
/
General Config/System/
page as shown in Figure 2-9.
Figure 2-9
Host Information
The Host Name is not an essential setting, but it helps to identify the device
in a network. Use this setting to assign a name to the device.
Version 1.01
13
Bridge IP Address Information
Use this setting to assign or change the AirEther CB11 s IP address.
Bridge Subnet Mask
Enter an IP subnet mask to identify the sub network so the IP address can
be recognized on the LAN.
Default Route IP
Enter the default Gateway IP Address.
DNS Server IP
Enter the Primary/Secondary DNS Server IP Address, and click
FINISH
at
the bottom of this page to complete the modification of this page.
2.4.5 Set Wireless Encryption for Wireless Interface
The AirEther CB11 supports 64-bit and 128-bit WEP encryption.
For
64-bit
WEP encryption, an encryption key is 10 hexadecimal
characters (0-9 and A-F) or 5 ASCII characters.
For
128-bit
WEP encryption, an encryption key is 26 hexadecimal
characters or 13 ASCII characters.
Modify the WEP encryption parameters on the web page /
General
Config/Wireless/
. Enter 1~15 characters into the
WEP Key
field, and
click
KeyGen
to generate the WEP64 or WEP128 key patterns.
Summary of Contents for AirEther CB11
Page 29: ...Version 1 01 54 ...
