Version 1.01
26
4.1 IP Configuration
The IP Configuration method is different in each Operating Mode. User
could refer to the following descriptions for details.
Wireless Client Bridge
Step 1
Select the Wireless Client Bridge mode, and enter the IP Address
manually into the
Bridge IP Address
field.
Step 2
Use
Bridge IP Address
setting to assign or change the bridge s IP
address.
Step 3
Click
FINISH
at the bottom of this page to complete the
modification of IP address.
Wireless Client Router
In this mode, user can assign a Wireless and Ethernet IP address to the
AirEther CB11 manually.
The
NAPT
function allows home users and small businesses to connect
their network to the Internet cost-effectively and efficiently. User has to
enable it to allow the subscribers to connect to the Internet in this mode.
Click
FINISH
at the bottom of this page to complete the IP address
modifications after enabling NAPT function.
Version 1.01
27
4.2 Virtual Server
Sometimes, the administrator would like to expose the internal servers on
the local intranet to the public Internet. For this, you must create the Virtual
Server Mapping for these invisible internal servers.
Step 1
Select the
/General Config/ TCP/IP/Virtual Server
, and then
the
Virtual Server
screen appears. Figure 4-1 below shows the
current virtual server entry table. (
The Virtual Server Mapping
pool is empty as default
)
Figure 4-1
Step 2
Click
Add
, and the Virtual Server Entry Edit page appears as
shown in Figure 4-2 on the next page.
Summary of Contents for AirEther CB11
Page 29: ...Version 1 01 54 ...
