Inscape Data AirEther CB11, User Manual

Page: 26 / 29

Version 1.01 48
7.1.3 SNMP
7.1.3.1 Table of SNMP Community Pool
Parameter Description Default Value
Index 1 Enable
Index 2
Enable
Index 3
Disable
Index 4
Disable
Index 5
Validity
Enable or disable the function
of the corresponding community
index
Disable
Index 1 Read
Index 2
Write
Index 3
---
Index 4
---
Index 5
Access
Right
Select the access right
(Deny/Read/Write/Create) for
SNMP Manager
---
Index 1 public
Index 2
private
Index 3
---
Index 4
---
Index 5
Community
Specify the type of community
(public or private) for SNMP
Manager
---
7.1.3.2 Table of SNMP Trap Community Host Pool
Parameter Description Default Value
Index 1 Version1
Index 2
Version2
Index 3
---
Index 4
---
Index 5
Version
Select or disable the SNMP
Version
Version 1: MIB1
Version 2: MIB2
---
Index 1 192.168.2.100
Index 2
192.168.2.100
Index 3
---
Index 4
---
Index 5
IP Address
Specify the IP address of the
SNMP Manager for SNMP Trap
Report
---
Index 1 public
Index 2
public
Index 3
---
Index 4
Community Specify the type of community
(public or private) for SNMP
Manager
---
Version 1.01 49
Index 5
---
7.1.4 Wireless LAN
Parameter Description Default Value
RTS Threshold
Set RTS (Request To Send)
threshold value
1600
Fragmentation
Threshold Set fragmentation threshold
value
1600
SSID
Wireless LAN service area
identifier of the RB (case
sensitive)
wireless
Station Name Show the name of the AP ap
WEP Key
Push the KeyGen button to
generate the WEP key patterns
automatically
wepkey
WEP
1. WEP128
2. WEP64
3. Disable
Disable
Default Key
Select a WEP key to encrypt
each frame transmitted from
the radio using one the of the 4
Keys from the Key Panel
1
Key Panel
When you use WEP to
communicate with the other
wireless clients, all the wireless
devices in this network must
have the same encryption key
or pass phrase.
Note: each key must consist
of hex digits, it means that
only digit 0 -9 and letters A-F
are valid entries. If entered
incorrectly, program will not
write keys to a driver.