Version 1.01
52
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Re-orient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that which
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Professional Installation
Per the recommendation of the FCC, the installation of high gain
directional antenna to the system, which are intended to operated solely as
a point-to-point system and whose total power e30dBm EIRP,
require professional installation. It is the responsibility of the installer and
the end user that the high power systems are operated strictly as a point-to-
point system.
Systems operating as a point-to-multipoint system or use non directional
antennas cannot 30dBm EIRP power requirement under any
circumstances and do not require professional installation.
Information to User
The user manual or instruction manual for an intentional or unintentional
radiator shall caution the user that changes or modifications not expressly
approved by the party responsible for compliance could void the user s
authority to operate the equipment.
Manufacturer s Declaration of Conformity
Inscape Data Corporation
1613 South Main Street, Suite 105
Milpitas, CA 95035
U.S.A.
Declares that the product:
Date
November 5, 2002
Brand Name
Inscape Data Corporation
Model Number
AirEther CB11
Equipment Type
Outdoor Wireless Client Bridge
Complies with Part 15 Class C of the FCC rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
Version 1.01
53
interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
European Community CE Notice
Marking by the symbol
Indicates compliance with the essential requirements of
Directive
1999/5/EC
. Such marking is indicative that this equipment meets or
exceeds the following technical standards:
EN 300 328-2
EN 301 489-1
EN 301 489-17
EN 60950
Marking by the symbol
Indicates compliance with the essential requirements of
R&TTE Directive
99/5/EC
, and the product is permitted to be used in the following EC
countries, including
Germany, UK, The Netherlands, Belgium, Norway,
Sweden, Denmark, Finland, France, Italy, Spain, Austria, Iceland,
Ireland, Portugal, Switzerland, Greece and Luxembourg
.
Summary of Contents for AirEther CB11
Page 29: ...Version 1 01 54 ...
