Version 1.01
30
4.3 Configure SNMP
Select the
/General Config/ TCP/IP/SNMP ,
and the SNMP screen
appears. Figure 4-3 below shows the current SNMP community pool and
trap host pool.
Figure 4-3
4.3.1 Configure Community Pool
The SNMP Community Pool has five entries.
1.
To modify the entry, click the select button beside the entry
index number and click
Modify
. The configuration page
appears. See Figure 4-4.
Version 1.01
31
Figure 4-4
2.
Specify the Validity, Access Right and Community field.
Validity.
Select
Enable
or
Disable
to control this
community.
Access Right.
Select a command from the pull down
menu for this field.
Community.
Enter the password related the Access Right
in this field.
3.
Click
OK
to refresh the current community pool.
4.
To modify another community entry to the current community
pool, repeat step 1 through step 3.
5.
When you have modified all the entries preferred, click
FINISH.
Summary of Contents for AirEther CB11
Page 29: ...Version 1 01 54 ...
