Wireless Setup
3/18/15 06443E © 2015, Inovonics - www.inovonics.com
28
6.
Open the cover and press the reset button.
7.
Wait ten seconds and replace the cover.
8.
Make sure a check displays next to the repeater you just reset in the
window shown in Figure 5-3. If not, reset the repeater again, making sure
to wait ten seconds before replacing the cover; if so, reset the next
repeater. Repeat until all repeaters in the system have been reset.
9.
Once all repeaters are reset, Click “Close” on the reset checkbox window.
All repeaters are now registered.
10.
Navigate to the home screen and ensure all repeaters are shown as
active within three to four minutes.
