Wireless Setup
3/18/15 06443E © 2015, Inovonics - www.inovonics.com
27
5.1.1 Update the NID
To update the NID.
1.
Select a NID from the “Network ID (NID)” dropdown menu. Make sure the
NID you select is different from that of any other EchoStream systems
that might interfere with yours.
Caution:
The NID setting of 0 is only used for diagnostics purposes. Make sure the NID
you pick is greater than 0.
2.
Click “Update” to change to the new NID.
3.
The following displays. Click “Update” to continue.
Figure 5-2
Repeater reset warning message
4.
A list of repeaters registered to the system will display in a pop-up
window.
Figure 5-3
Registered repeaters
5.
Go to the first repeater in your system.
