ACG Setup
3/18/15 06443E © 2015, Inovonics - www.inovonics.com
19
The EN6080 area control gateway will request a new IP address from the
DHCP server and, if successful, display the IP update dialog box shown in
Figure 3-3. Write down the new IP address displayed in the IP update dialog
box.
Figure 3-3
IP update dialog box
4.
Click “Accept New IP.”
5.
The EN6080 area control gateway will reboot. When the “Refresh” button
displays, click it.
3.3 Date and Time Setup
The EN6080 area control gateway contains a real time clock that is used to tag
events and log entries. The date and time setup screen is used to configure
the date and time of that clock. It is only accessible to admin level users. The
area control gateway can either poll the Network Time Protocol servers to
automatically synchronize the time and date, or synchronize time and date
with the computer connected to the EN6080.
If the time reported by the EN6080 area control gateway differs from the time
setting on the computer by more than five seconds, it will be reported on the
home page. Discrepancies as small as one second will be reported on the date
and time setup page.
