Innovator AW3-PJT, Manual

Page: 31 / 208

4) Ice production
3-1) After 38 minutes pass from the water supply, the control board will check the temperature.
3-2) If the sensor reads the temperature lower than 18.5
Ԭ
for more than 5 secs, than the ice
production process is completed.
5) Test function
●
In order to operate a test function, press the Test button for 1.5 second.
●
This function can be used to check a proper working, to clean the ice tray, and to adjust the
water level in the ice tray.
4-1) This function only works when the ice tray is leveled and the ice full signal is cleared.
4-2) When the water line is connected, each process such as a water supply, scooping and
leveling can be investigated by this button.
6) Ice off function
5-1) When the Ice off option is selected by Ice Type button, the ice making process will cease.
5-2) When the ice making process ceases, the final state will be the ice tray with supplied water.
5-3) When Cubed or Crushed option is selected again, the control board will check an
accumulated time period. After making it 38 minutes and when the ice tray temperature is
acceptable, ice-scooping process will begin.
7) Functions when the freezer door is open
●
When the freezer door is open, icing fan will cease in order to prevent frost on the path of
cold air from FZ compartment to ice compartment.
6-1) If the ices is being scooped when the freezer door is open, they can still be scooped out.
So the ice-falling sound can happen.
6-2) The water supply process remains working as usual.
6-3) Because the icing fan ceased, another water supply will not happen.
2 -3 . I c e -M a ke r Func t ion
2 . I nst ruc t ion of Func t ion
To do list
https://appliancetechmanuals.com