background image

To do list

4-1-5. Exhibition mode setting function

1) If Energy Saver Key + Power freeze are pressed simultaneously for 3 seconds during normal operation,

Cooling Off mode will be started with buzzer sound(ding-dong).

2) If above Energy Saver Key + Power freeze Key are pressed one more time, Cooling Off mode will be

canceled.

3) If Cooling Off mode is selected, blinks "OF-OF" on the temperature setting display of the panel and it

indicates the refrigerator has entered the Cooling Off mode.

4) During Cooling Off mode, if fresh food and freezer compartments sensors are higher than 149

Ԭ

(65

Ԩ

)

Cooling Off mode will be canceled automatically and freezing operation will be returned.
(There is no buzzer sound when the Cooling Off mode is canceled by the temperature)

5) Operation contents of Cooling Off mode

- Display, Fan motor and etc operate normally, not to operate compressor only.
- Defrost is not operated. (including french heater)
- Display function of the initial real temperature is finished.
- Under the condition of Cooling Off mode, Cooling Off mode will be operated when Power On after Power OFF.

If Energy Saver Key + Power freeze Key are pressed for 3 seconds, Cooling Off mode will be started.

4 . Che ck  t he  inst a llat ion st at us

4 -1 . Func t ion for fa ilure  dia gnosis

https://appliancetechmanuals.com

Summary of Contents for AW3-PJT

















































































































































































































Reviews: