Innovator AW3-PJT, Manual

Page: 30 / 208

3) Initial Operation function
3-1) Whenever the power is on, the control board checks the temperature of ice sensor.
If the temperature of sensor is under 32
Ԭ
(0 ゜ C ), the heater is operated for 2 minutes.
Otherwise, the heater is not operated. Then initial test mode will be started.
3-2) At initial test mode, geared motor starts to rotate and heater is operated for 30 seconds.
3-3) When the ice tray is leveled within 6 minutes,
it will remain until the temperature of sensor drop down to 32
Ԭ
(0 ゜ C ),
3-4) If the temperature is maintained lower than 32
Ԭ
(0 ゜ C ), for 5 seconds, water is supplied.
It will remain until the temperature of sensor drop down to 18.5F
3-5) If the temperature is maintained lower than 18.5
Ԭ
(-7.5 ゜ C ) for 5 seconds,
and the ice full sensor is off position, the blade ice scoop starts to rotate
to scoop ice cubes out.
Leveling S/W Ice full S/W Judgement MICOM PORT
ON(“LOW”) ON(“LOW”) waiting until freezing of water
IC02-MICOM #27: Leveling
IC02-MICOM #28: Ice full
ON(“LOW”) OFF(“HIGH”) Out of order
OFF(“HIGH”) ON(“LOW”) Ice bucket with full ice-cubes
OFF(“HIGH”) OFF(“HIGH”) Rotating before check of full ice-cubes
[Re fe re nc e t a ble ]
2 -3 . I c e -M a ke r Func t ion
2 . I nst ruc t ion of Func t ion
To do list
https://appliancetechmanuals.com