14
Copyright © 2008 Innovatech Products & Equipment Co., Inc. All Rights Reserved.
Controls and Machine Operation
Drive Controls
Figure 1 Operator Controls – Side View
The drive controls (two levers) are located to the right and left of the operator.
To move the machine forward, push the left and right levers forward at the same time and hold
them in position.
To move the machine in reverse, pull back the left and right levers at the same time and hold
them in position. The reverse alarm sounds.
To turn the machine to the left, push the right lever only.
To turn the machine to the right, push the left lever only.
AUTO STOP:
When you release the drive levers, the engine continues to run but the machine
stops moving.
Drive Controls