Copyright 2018, InnovaPrep LLC
Patented
https://www.innovaprep.com/patents
10
3
C
OMPONENTS OF THE
C
ONCENTRATING
P
IPETTE
The following Section describes the components of the InnovaPrep Concentrating Pipette Select.
FIGURE 3.1 CONCENTRATING PIPETTE COMPONENTS - RIGHT SIDE
Fluidics Head
– This component contains the bulk of the fluidic components in the instrument. The Head can be raised
and lowered to position the Concentrating Pipette Tip in the sample container. LED lights in the head will glow blue
when the instrument is on, red when the instrument is concentrating and green when the instrument is eluting.
Tip Interface Ports
– This is the point of installation for the consumable Concentrating Pipette Tips. The foam Elution
Port is in front where the foam is introduced into the tip at the time of elution. The sample fluid exits the rear Permeate
Port during a sample run.
Concentrating Pipette Tip (CPT)
– This consumable component is the only part of the instrument that will come in
contact with the sample.
Canister Latch
– This latch holds the Elution Fluid canister in place.
Fluidics Head
Tip Interface Ports
Single-use Pipette Tip
Sample Platform
Control Panel
Canister Latch
Elution Fluid (Foam) Canister
Canister Interface Port
Storage Fluid w/
Adapter Set
Maintenance Tip
