InisBofin Insert Boiler Multi-fuel Stove
10
2.
Remove 3-4 riddler bars
starting at the second from
the back and working forward.
To remove the riddler bars
for airway cleaning first
lift the front of each
firebox side plate and swing
toward the stove centre. They
can them be lifted out of the
stove. A knife or screwdriver
can be used to lever forward
the rear cast plate at the
top of the casting and then
it can be lifted out of the
stove to expose the rear
airway channel for vacuuming
out. To remove a riddler bar
first put the bars in the
half way opened position
(Hand tool in horizontal
position), then remove the
ash pan. Use a knife or
screwdriver to lift the left
side of the riddler bar
slightly forward as you lift
it and then the bar can be
lifted away.
3. (Fig.6) Vacuum out all visible
ash thoroughly. Re-assembly is the
reverse of dis-assembly.
Fig 6
4. Check that the riddler mechanism
operates free and clear.
Inis Stoves highly recommends
annual servicing of the stove as
the service engineer will ensure
correct and thorough cleaning of
the entire stove.
Inspect all internal parts of the
stove and replace if needed.
Only Inis Stoves or an approved
Engineer on our behalf should
modify the stove in any way.
Paint work:
To clean the paint of the stove we
recommend the use of a dry cloth
containing a small amount of light
oil, for example “WD40”. Avoid
using abrasive material on the
paint of the stove.
Door seals:
The door seals should be inspected
regularly to check for damage and
