9
8
English
English
Caution:
Do not connect the lamp to the power supply
until the assembly is completed.
Enclosed:
Version 1:
1 LED film + 1 paper sail
Version 2:
2 LED films
1 ballast with mains plug
4 silicone stoppers
Preparations for assembly - Version 1
Stand the lamp base on the floor and extend the telescope
rods (
1
) to the required height.
1
Dew Drops Floor
can be used as an uplight or a downlight,
with or without the paper sail:
Uplight:
The LEDs face upwards, with the paper sail mounted
above or below the film, depending on the desired light
intensity. We recommend mounting the sail
above
the film
to act as a diffusor.
2
Downlight:
The LEDs face downwards, with the paper sail
mounted above or below the film, depending on the desired
light intensity. We recommend mounting the sail
below
the
film to act as a diffusor.
2
Assembly - Version 1
Remove the LED film and the paper sail very carefully from
the packaging. Hang the LED film - by the corner to which
the long flat cable (
2
) is attached - on the hook (
3
) on the
telescope rod with the on-off switch.
4
Feed the flat cable (
2
) down through the two silicone rings (
4
)
on the telescope rod.
5
Insert the plug on the end of the flat cable in the socket of
the on-off switch (
5
). Push the plug firmly into place until
you hear a definite click.
6
Hang the LED film on the hook on the second telescope
rod. Hang the paper sail on the corresponding hooks, and
secure the film and the sail with the silicone stoppers (
6
)
provided.
7
Connect the lamp cable (
7
) to the plug (
8
) and insert the
plug in the mains socket.
8
Preparations for assembly - Version 2
Stand the lamp base on the floor and extend the telescope
rods (
1
) to the required height.
1
Dew Drops Floor
can be used as an uplight or a downlight, or
as both at once:
Uplight:
The LEDs in both films face
upwards
.
3
Downlight:
The LEDs in both films face
downwards
.
3
Up- and downlight:
LEDs in the upper film face upwards;
those in the lower film face downwards.
3
Assembly - Version 2
Remove the LED films very carefully from the packaging
Important:
The film with the long flat cable must be in-
stalled above the film with the short cable.
Hang the LED film - by the corner to which the long flat
cable (
2
) is attached - on the hook (
3
) on the telescope rod
with the on-off switch.
4
Feed the flat cable (
2
) down through the two silicone rings (
4
)
on the telescope rod.
5
Summary of Contents for DEW DROPS FLOOR
Page 13: ...23 22 6 5 2 4 2 5 7 8 6 7 8...
