3. Remove the cut-out shown in the figure and fit the BLACK M-23 gland with its nut.
4. To install the network cable, place the end of the cable with the RJ45 through the PG and to the RJ45 connector
on the ethernet card.
Cable from the card to the right-hand side and to the cut-out on the bottom of the equipment housing.
Installation Manual
INGECON
®
SUN SMART TL
AAY2000IKI03
AAY2000IKI03
Rev. _
Date: March 2011
Page 61 of 64
61 of 64
of 64