Screen 6.
FW Ver.:
Unit firmware version.
DFWVer.:
Unit display firmware version.
D. Boot
: Version of the display program enabling firmware housing.
9.5 Configuration
Enables verification of certain parameters for which the inverter has been configured. Access restricted to
installer.
Press
OK
on the CONFIGURATION option in the MAIN MENU. Giving access to the following screen:
12:00 12/04/10
MAIN MENU
Monitoring
Language
Change date
Configuration
12:00 12/04/10
CONFIGURATION
COUNTRY / NORMATIVE
GRID VOLTAGE
GROUNDING
OTHER ADJUSTMENTS
Do not change any of these parameters if you are not the installer and you are not
completely sure. INGETEAM ENERGY S.A. accepts no liability for damage to the unit or
the installation due to configuration changes.
The following passwords are necessary for some configuration changes: CODE 1, PASSWORD 2, PASSWORD
3. Given that configuration changes occur in extraordinary installation situations, the passwords are not supplied
with the unit, but rather need to be requested from INGETEAM ENERGY S.A.’s Commercial Department.
The menu will display only the configurations corresponding to the device hardware.
The various available configuration changes are described below.
9.5.1 Country / Normative
Press
OK
on the COUNTRY / NORMATIVE option from the CONFIGURATION submenu.
12:00 12/04/10
COUNTRY / NORMATIVE
Country ESPAÑA
Normative
RD1663
Code 1
31F0
The following screen will appear:
12:00 12/04/10
COUNTRY / NORMATIVE
DANMARK
ESPAÑA
ENGLAND
>DEUTSCHLAND
ITALIA
In order to make a change to COUNTRY / NORMATIVE,
first press the
key, followed by
ESC
, and then keep
them both pressed for 4 seconds. A list of COUNTRIES
will appear on the screen.
12:00 12/04/10
CONFIGURATION
GRID VOLTAGE
GROUNDING
OTHER ADJUSTMENTS
COUNTRY / NORMATIVE
Installation Manual
INGECON
®
SUN SMART TL
AAY2000IKI03
AAY2000IKI03
Rev. _
Date: March 2011
Page 47 of 64
47 of 64
of 64
