9.8 Start / Stop
The operation of the inverter can be stopped and started manually using this menu.
The Start or Stop status remains unchanged even if the unit losses its power supply.
Press
OK
to toggle from one status to the other. The display shows the following message:
Select the desired option and press
OK
again. The stopped status is maintained until the menu is accessed again.
12:00 12/04/10
MAIN MENU
Change date
Reset partial data
Change inverter number
Start / Stop
12:00
09/01/09
Change to Stop (OK)
Cancel (ESC)
ON / OFF
9.9 Partial Data Reset
The partial counters Part E, Tpar con and Npcon are set to zero from this menu.
Press
OK
to set the counters to zero. The following message is shown on the screen:
Pressing
OK
again confirms the selection.
12:00 12/04/10
MAIN MENU
Change date
Start / Stop
Reset partial data
Change inverter number
Reset partial data
12:00 09/01/09
Confirm (OK)
Cancel (ESC)
RESET PARTIAL DATA
9.10 Change inverter number
From this menu a number is assigned to each phase of the inverter. This is required for configuring communications.
Press
OK
on the phase whose number you wish to change.
12:00 12/04/10
MAIN MENU
Change date
Start / Stop
Reset partial data
Change inverter number
12:00 09/01/09
Inverter number 101
Confirm (OK)
Cancel (ESC)
CHANGE INV NUMBER
12:00 12/04/10
CHANGE INV NUMBER
Phase 2
Phase 3
Phase 1
When you are in the menu of the selected
phase, change the inverter number by pressing
and
.
Press
OK
to confirm the number selected.
Installation Manual
INGECON
®
SUN SMART TL
AAY2000IKI03
AAY2000IKI03
Rev. _
Date: March 2011
Page 52 of 64
52 of 64
of 64
