A solid wall must be reserved for fixing the inverter. Bear in mind that it must be possible to drill the wall and fit
suitable wall plugs and bolts to support the unit’s weight.
A fixing plate is supplied with the unit. This plate must be fixed to the wall on which the unit is subsequently to be
fitted.
Follow these steps for fixing to the wall:
- Mark the attachment points for the plate on the wall.
- Drill holes in the wall with a bit recommended for the screws to be used to secure the plate to the wall later.
- Fix the plate using wall plugs and stainless steel screws to prevent corrosion.
- The use of the appropriate screws (minimum external diameter 6 mm), washers and wall plugs (minimum external
diameter 18 mm) is recommended to secure the plate.
- Suspend the unit from the plate.
- Screw on the bottom attachment.
- Check that the unit is well secured.
Installation Manual
INGECON
®
SUN SMART TL
AAY2000IKI03
AAY2000IKI03
Rev. _
Date: March 2011
Page 26 of 64
26 of 64
of 64
