5.4 Electrical disconnection
To disconnect the unit, follow the steps presented in the Section
‘Order of connecting the unit’
of this manual in
reverse order.
Take careful note of the following warning:
There are electrical capacitances in the unit which can maintain high voltages even after
having disconnected the inverter from the solar panels and the grid.
And remember:
Ingecon® Sun units may only be opened by authorised personnel.
During installation and maintenance operations on the units, the use of personal protective equipment, hard hat,
gloves and safety footwear is mandatory.
Do not touch the sides of the inverter. They may reach high temperatures.
Installation work requiring opening the unit should be done in a dry environment, so that no moisture left inside could
condense and damage the electronics.
Ingeteam Energy, S.A. is not liable for any damages caused by improper use of their equipment.
Installation Manual
INGECON
®
SUN SMART TL
AAY2000IKI03
AAY2000IKI03
Rev. _
Date: March 2011
Page 36 of 64
36 of 64
of 64