Page 6 of 44
EP20-XXXXX-XXX-XXX (en)
2. MODEL DESCRIPTION CHART
2.1. Model Code Explanation
E P
-
2 0
X
X
Wetted Parts
A -
Port
F - ANSI / DIN Hybrid Flange
Ball
Diaphragms
Bellows
V - Viton®
NOTICE: All possible options are shown in the chart, however, certain combinations may not be recommended.
Consult a representative or the factory if you have questions concerning availability.
Special Testing
Pumps requiring special tests will have a separate line item on the Purchase Order
S - Stainless Steel
0 - No Motor
A - Ordinary Motor
B - Hazardous Motor
Motor
A - Santoprene®
A - Santoprene®
X
X
X
-
X
X
X
XX
X
X
0 - None
C - 380 - 500V, 50/60 Hz, Ordinary Drive
D - 380 - 500V, 50/60 Hz, Hazardous Drive
Drive
A - Revision
Revision
-
C - Cast Iron
Aluminum
Seat
A - Santoprene®
Pump Crank case
C -
Cast Iron
S - Integrated Spline Shaft
Pump Input Shaft
F - Aluminum
H - 440 SST
S - 316 SST
S - 316 SST
T - PTFE
V - Viton®
T - PTFE
2.2. Encoder Cable Assembly for Ordinary Motors
Please note encoder cable assemblies are available as an accessory item for ordinary location motors only. This shielded cable
assembly connects to the 12-pin encoder connector on the motor and extends the cable to the flying leads needed to inter-
face to the VFD encoder card. Multiple lengths are available.
See page 15 for installation instructions.
Part Number (PN)
Description
67561-003
Ordinary Motor Encoder Cable Assembly (3 m)
67561-006
Ordinary Motor Encoder Cable Assembly (6 m)
67561-009
Ordinary Motor Encoder Cable Assembly (9 m)
67561-015
Ordinary Motor Encoder Cable Assembly (15 m)
67561-050
Ordinary Motor Encoder Cable Assembly (50 m)
67561-100
Ordinary Motor Encoder Cable Assembly (100 m)
