Portable Compressor 7/20
12---1/(12---2 blank)
SEPTEMBER 2003
12. LUBRICATOR
12.1.
SAFETY
WARNING
ENSURE THAT THE LUBRICATOR FILLER CAP IS
RE---TIGHTENED CORRECTLY AFTER REPLISHING
WITH OIL.
WARNING
DO NOT REPLENISH THE LUBRICATOR OIL, OR SERVICE
THE LUBRICATOR WITHOUT FIRST MAKING SURE THAT
THE MACHINE IS STOPPED AND THE SYSTEM HAS BEEN
COMPLETELY RELIEVED OF ALL AIR PRESSURE (REFER
TO
8.4. STOPPING THE MACHINE
IN THE
8. OPERATING
INSTRUCTIONS
SECTION OF THIS MANUAL).
CAUTION
IF THE NYLON TUBES TO THE LUBRICATOR ARE
DISCONNECTED THEN ENSURE THAT EACH TUBE IS RE
CONNECTED IN THIS ORIGINAL LOCATION.
12.2.
GENERAL INFORMATION
Oil capacity:
2 l (0.53 gal).
Oil specification:
Refer to the Tool
Manufacturer‘s Manual.
12.3.
OPERATING INSTRUCTIONS
A. Commissioning
Check the lubricator oil level and fill as necessary.
B. Prior to starting
Check the lubricator oil level and replenish as necessary.
12.4.
MAINTENANCE
Check the lubricator oil level and replenish as necessary.
12.5.
FAULT FINDING
Table 12---1.
FAULT FINDING
Fault
Cause
Remedy
No oil flow
Incorrect connection
Reverse the nylon tube connections to the lubricator
