Portable Compressor 7/20
5---1
SEPTEMBER 2003
5. NOISE EMISSION
THIS SECTION PERTAINS ONLY TO MACHINES
DISTRIBUTED WITHIN THE UNITED STATES.
WARNING
TAMPERING WITH NOISE CONTROL SYSTEM
PROHIBITED
Federal law prohibits the following acts or the causing thereof:
(1.) The removal or rendering inoperative by any persons, other
than for purposes of maintenance, repair, or replacement,
of any device or element of design incorporated into any
new compressor for the purpose of noise control prior to its
sale or delivery to the ultimate purchaser or while it is in use.
(2.) The use of the compressor after such a device or element
of design has been removed or rendered inoperative by
any person.
Among those acts included in the prohibition against tampering
are these:
---
Removal or rendering inoperative any of the
following:
a.
the engine exhaust system or parts thereof,
b. the air intake system or parts thereof,
c.
enclosure or parts thereof.
---
Removal of any of the following:
a.
fan shroud,
b. vibration mounts,
c.
sound absorption material.
---
Operation of the compressor with any of the
enclosure doors open.
5.1.
COMPRESSOR NOISE EMISSION
CONTROL INFORMATION
(1.) The removal or rendering inoperative, other than for the
purpose of maintenance, repair, or replacement of any
noise control device or an element of design incorporated
into this compressor in compliance with the noise control
act.
(2.) The use of this compressor after such a device or an
element of design has been removed or rendered
inoperative.
NOTE
The above information applies only to units that are built in
compliance with the U.S. Environmental Protection Agency.
Ingersoll---Rand Company reserves the right to make changes
or add improvements without notice and without incurring any
obligation to make such changes or add such improvements to
products sold previously.
The Purchaser is urged to include the above provisions in any
agreement for any resale of this compressor.
5.2.
NOISE EMISSION CONTROL,
MAINTENANCE LOG
COMPRESSOR MODEL:
UNIT IDENTIFICATION
DEALER OR DISTRIBUTOR FROM WHOM
PURCHASED:
DATE PURCHASED:
SERIAL No.:
USER UNIT No.:
ENGINE MAKE & MODEL:
SERIAL No:
PURCHASER OR OWNER:
ADDRESS:
Figure 5-- 1.
MAINTENANCE LOG
The Noise Control Act of 1972 (86 Stat. 1234) prohibits
tampering with the noise control system of any compressor
manufactured and sold under the above regulations,
specifically the following acts or the causing thereof:
(1.) The removal or rendering inoperative by any persons, other
than for purposes of maintenance, repair, or replacement,
of any device or element of design incorporated into any
new compressor for the purpose of noise control prior to its
sale or delivery to the ultimate purchaser or while it is in use.
