Portable Compressor 7/20
13---2
SEPTEMBER 2003
13.3.
GENERAL INFORMATION
13.3.1.
Specifications
Table 13---1.
MAIN DATA AND SPECIFICATIONS
Model
KUBOTA D1005---EBB---EC---LT---1
Type
Vertical, water---cooled, 4---cycle diesel engine
Number of cylinders
3
Bore and atroke
mm (in)
76x73.6 (2.99x2.90)
Total displacement
cm
3
(cu in)
1,001 (61.08)
Combustion chamber
Spherical Type (E---TVCS)
SAE J995 Gross Intermittent
kW (hp) / min
--- 1
(RPM)
17.5 (23.5) / 3,000
SAE J1349 Net Intermittent
kW (hp) /min
--- 1
(RPM)
16.8 (22.5) / 3,000
SAE J1349 Net Continuous
kW (hp) / min
--- 1
(RPM)
14.2 (19.5) / 3,000
Maximum bare speed
min
--- 1
(RPM)
3,200
Minimum bare idling speed
min
--- 1
(RPM)
850÷950
Order of firing
1---2---3
Direction of rotation
Counter---clockwise (viewed from flywheel side)
Injection pump
Bosch MD Type Mini Pump
Injection pressure
13.73 MPa (1,991 psi)
Injection timing (Before T.D.C.)
19
˚
Compression ratio
23
Fuel
Diesel Fuel No.2---D (ASTM D975)
Lubricant (API classification)
above CD grade
Dimensions (length x width x height) mm (in)
497.8x396x608.7 (19.60x15.59x23.96)
Dry weight
kg (lb)
89.0 (196.2)
Starting system
Cell starter (with glow plug)
Starting motor
12 V, 1.0 kW
Charging generator
12 V, 360 W
Recommended battery capacity
12 V, 65 Ahr, equivalent
NOTE
Specifications are subject to change without notice.
13.3.2.
Engine Identification
A. Serial Number Location
The engine serial number is stamped on the front upper right side
of the cylinder body.
B. Confirmation Of Engine Serial Number
It is advisable to quote the engine serial number together with the
machine serial number, as it is required when you contact the
Ingersoll---Rand branch or distributor for repair, service or parts
ordering.
1.
Engine SERIAL No.
1
Figure 13---2.
ENGINE IDENTIFICATION
